Cyrious 5×10


9 in stock (can be backordered)

Hypertherm Connect Kit

The Hypertherm Connect allows remote control of current and air pressure settings on multiple Hypertherm plasma cutters, including models 45xp, 65, 85, 105, and 125. Values are set automatically from the Command CNC control software.

Remote Hand Pendant

Control virtually every aspect of your Cyrious Plasma Table from the palm of your hand!

This is not some game controller or limited function MPG used just to jog your CNC plasma table around. The PN200 is a comprehensive hand control that puts total control of your Cyrious plasma machine at your fingertips. The PN200 is extremely versatile and tied tightly to your Cyrious plasma table, meaning any action performed on the PN200 will show on the console, and vice versa. You can quickly see the status of critical settings on the front of the PN200 with the multiple-status LEDs. Most are two-color LEDs, making it easy to display several states. If you need to see the important objects on your screen — including XYZ DROs, feed-rate and override numbers, and THC settings/numbers — just click on the PN200 “SCREEN” button and up pops a custom screen on your monitor with large readouts you can see from across the room.

The PN200 allows you to use the keypad or the 360-degree proportional jog stick to move at four different speeds and ranges. Ultra-slow jog and single-step mode allow you to get as precise as you need when using your plasma table, and you can switch back and forth with the press of a button! Plus, you can do all of the precut setup (zero, reference, home, run macros, etc.) with one finger. The PN200 also gives you complete control of your Cyrious digital torch height — you can even adjust preset arc volts while you cut!

The PN200 is truly a breakthrough in CNC table pendants as it frees you from running back and forth to the keyboard when you are operating the table. Once you load the G-Code to cut into the PC, you can do the rest of the setup and run from the PN200. You can also equip your PC with a large monitor to make the entire CNC plasma table kit almost completely remote.

Plasma Cutter

Give your plasma cutting table a boost with a great Hypertherm Plasma Cutter.

Plate Marker

Organize, score, or mark parts with ease.

Router Option

Don’t stop with metal — add a router option to open up additional possibilities with your CNC table. This comes with a Cyrious router mount, a Makita 11-Amp 2-1/4 HP Router, and factory brackets to mount down the spoil boards for routing. Also included are software setup instructions, profiles, and calibration techniques.


Add oxy capabilities to your plasma table with oxy-fuel (feature coming soon).


Don’t want to deal with water? Equip your CNC plasma table with downdraft for the best removal options.



  • Cutting space — 62 inches by 122 inches
  • Speed guide 25-millimeter linear rails
  • 3:1 planetary gearboxes
  • Rack and pinion
  • Homing/auto-squaring switches
  • Mini-PC with 32-gigabyte SSD, monitor, mouse, and keyboard
  • 500-watt smart power controller with fault detection and shut down
  • High-speed DTHC5 torch-height control with isolated remote sensor module
  • Four (4) 620 ounce-inch stepper motors
  • Quality, U.S.-made microstepping motor drivers from Geckodrive
  • Pre-loaded Linux computer and CommandCNC
  • Fully licensed SheetCam and Control
  • 3 by 3 by 11 gauge square tube with fully welded frame and gantry
  • Powder-coated frame and gantry
  • 4-inch water bed with drain


  • Cyrious Z-axis with rigid rail and ball screw
  • Collision detection torch mount
  • Ohmic sensing
  • Backup touch off
  • Digital torch-height control
  • Dual-drive motors
  • Cut or corrugated HVAC material
  • Preloaded with Hypertherm tool charts
  • Rapid travel speed of 600 inches per minute
  • Cutting speeds match every book spec by Hypertherm and more
  • Compatible with routers, plate markers, and oxy-fuel torches
  • Cyrious computer station
  • Two-year warranty
  • Lifetime tech support


  • Add rotary tube and pipe attachment (price and feature coming soon)